Overiew; Figure 1-1, Front Panel Features - Magnum Energy ME-MR Series Owner's Manual

Introduction

1.0 Overiew

The ME-MR remote control allows you to monitor and customize basic operat-
ing parameters to your Magnum inverter/charger. The ME-MR remote can be
used on all Magnum inverter/charger models.
INFO: The ME-MR remote control has minimal settings available
in the Setup Menu. Careful consideration should be given to
choosing this remote over the full featured ME-RC when custom
izing the inverter/charger for your particluar system.
The ME-MR25 comes standard with a 25 foot, 4-conductor telephone cable
and includes non-volatile memory (preserves adjustable settings, even if
power to the remote or inverter is removed).
This manual is for the ME-MR with revision 1.0 or higher; see the TECH: 02
Revisions display on page 16 for information on how to determine your revi-
sion level.

Figure 1-1, Front Panel Features

The ME-MR is equipped with the following features:
• LED Indicators - at-a-glance LEDs provide the inverter/charger status
in a straightforward way.
• LCD Display - is a 8 x 2 line (16 characters total), alphanumeric display,
used for setting up the inverter/charger operation as well as viewing current
status or fault messages.
• ON/OFF or CHANGE Pushbutton - allows the inverter to be turned
On and Off. The "ON/OFF" button also serves as an "CHANGE" button when
navigating through SETUP and TECH menus.
• MENU or HOME Pushbutton - accesses SETUP and TECH menus. The
"MENU/HOME" button also serves as a "HOME" button to return directly to
the "Status" menu
• SAVE or HOLD Pushbutton - button serves as a "SAVE" button to
save settings when in the SETUP menus The "HOLD" button stops the status
screen scrolling.
2 ©2009 Magnum Energy Inc.