Magnum Energy ME-MR Series Owner's Manual page 22

Operation
5.1.3 ON/OFF Pushbuttons
ON/OFF: This pushbutton toggles the inverter function on and off. The
green "INV" LED turns on and off with the pushbutton.
5.1.4 MENU Pushbutton
MENU: This pushbutton provides quick access to menu items that can help
with confi guring, monitoring and troubleshooting your inverter/charger.
5.1.5 SAVE Pushbutton
SAVE: This pushbutton saves the changes to settings selected in the Setup
Menus.
5.1.6 CHANGE Pushbutton
CHANGE: This pushbutton scrolls through the selections available under
each menu heading for SETUP and TECH menus. This menu will restart if
you missed the desired selections, so if a selection is bypassed simply con-
tinue to press the MENU pushbutton until the desired selection appears.
5.1.7 Home Pushbutton
Home: Holding down on the Home button for 5 seconds exits SETUP menus
and returns to the status screen.
5.1.8 Hold Button:
Hold: Holding down on the Hold button for 5 seconds stops the status
screen from scrolling. Holding down again on the Hold button returns the
status screen to scrolling.
Info: All adjustable inverter/charger settings in the ME-MR are saved
in non-volatile memory and are preserved until changed - even if an
inverter reset is performed or if all power to the remote or inverter
is removed.
Info: The ME-MR remote control is an inverter only controller. In
order to display a Magnum Energy accessory you need to use the
ME-RC50 remote control. Please refer to the ME-RC50 remote control
manual on the Magnum Energy website at www. magnumenergy.
com for further information on displaying accessories.
20 ©2009 Magnum Energy Inc.