Operation - Magnum Energy ME-MR Series Owner's Manual

Operation

5.0 Operation
This section explains how to operate the inverter/charger. It also helps to
explain the operational status determined by the LED indicators and LCD
display.
5.1 Front Panel
The ME-MR front panel contains LEDs and a LCD display for viewing system
status; pushbuttons to control system operation.
Figure 5-1, ME-MR Front Panel Controls and Indicators
LC D S c reen
LE D
Indic ators
O N /O F F , M enu , S av e B uttons
5.1.1 LED Indicators
There are two LED's indicators on the front panel that light solid or blink
to indicate the inverter/charger's status. When the remote is fi rst powered
up, both LED's come on as it goes through a self-test. Once the self-test is
complete, the LED's along with the LCD provide the operating status of the
inverter/charger. See section 5.3.4 for the LED Indicator Guide.
5.1.2 LCD Display
The LCD display is used for setting up the system operation as well as
viewing the current operating status or any fault condition. This display has
two lines of alphanumeric characters and features a back-light that can be
set to turn off to conserve power. The top and bottom lines provides the
inverter/charger status, setup menus and tech information which is detailed
in this section. This display automatically powers up with the current
system status on the top line and the Home Screen on the bottom line.
©2009 Magnum Energy Inc. 19