Delete Measured Data - FAG Detector III Manual

Only the status display in the system structure is affected when the
alarm status is reset. The measuring data
remain unaffected.

3.10 Delete measured data

You can delete measured data in a set time range in the database. Doing this, the
characteristic values (i.e. trend data) and the time signals recorded during that
period of time are deleted. To delete data follow the sequence below:
· Left-click the element in the configuration tree, starting from which you want to
delete the data. E.g. select one machine. All data relating to the measuring
points of this machine are deleted for the selected time range.
· Click on System > Delete measured data or right-click on this point and select
delete measured data.
Opens the Delete measured data:
· Select the date and time for the start and for the end of the required period.
· Click on Period to deactivate the option and delete all data.
Trendline 3
status displays
88
93