Installing Usb-Serial Converter - FAG Detector III Manual

· Select the Supply voltage: External, 5V, 12V.
· Click OK to save the new sensor.

3.3.2 Installing USB-serial converter

A USB serial adapter is supplied with the Detector which you can use to connect
the Detector to computers with USB interfaces.
When installing the adapter software make sure you have the adapter and the
installation CD provided to hand.
Installation of the adapter software
To install the adapter software proceed as follows:
· Insert the supplied CD. The installation program should start automatically.
If the installation program does not start automatically you can start it manually
using Windows Explorer:
1. Open My computer.
2. Under Equipment with removable media click the right-hand mouse button on
the CD-ROM drive then click Open.
3. Double click to launch autorun.exe.
4. At USB TO RS232 Converter, click the folder icon next to Product Driver.
36