Statement Of Conformance To Electrical Safety And Emi Requirements - FAG Detector III Manual

2.6 Statement of Conformance to electrical safety and EMI
requirements
Declaration of conformity as per the Radio and Telecommunication
Transmitter Devices Act (FTEG) and Directive 1999/5/EC (R&TTE)
The manufacturer:
declares that the product:
Purpose:
Device category:
corresponds to the basic requirements of §3 and the other relevant provisions of
FTEG (article 3 of R&TTE) if used for the intended purpose.
Health and safety as per § 3 (1) 1. (article 3 (1) a))
Harmonised standards used:
Protection requirements with regard to EMC § 3 (1) 2, article 3 (1) b))
Harmonised standards applied:
Measures for efficient use of the radio frequency spectrum
Harmonised standards applied:
This statement of conformance is issued based on testing the EMC aspects of a
representative product sample of the above mentioned product in conformance
with the following standards:
ETSI EN 301 489
EN 61000-6-4
Measuring device identifier: CE
Herzogenrath, 22.06.2007
F'IS, FAG Industrial Services GmbH
Kaiserstraße 100
D-52134 Herzogenrath Germany
Detector III
Radio installation
RFID application
Category 1
EN 60950-1: 2001, EN 50364: 2001
ETSI EN 301 489-3 V1.4.1
ETSI EN 300 330-2 V1.3.1.
ETSI EN 300 330
EN 60950-1
EN 61000-6-2
FCC Part 15
General
17