Creating A Run Up/Coast Down Report - FAG Detector III Manual

3.12.5 Creating a run up/coast down report

To create a run up/coast down report, select a run up/coast down configuration in
your system tree and click Run up/coast down report in the Service menu. This
displays the Run up/coast down configuration.
Selecting data for the report
· Print configuration of run up / coast down: If this option is enabled, all
amplitude/phase diagram and run up/coast down test settings are also printed.
To hide/show specific sections of this configuration
options.
· Print run up/coast down diagrams: The run up/coast down measured data
available for the measuring point are also printed as an amplitude/phase
diagram, including any frequency bands.
Specifying a report time range
· Select the Time range option to define the limits for the report period.
104
, please use the other
61
63