Data View - FAG Detector III Manual

· To test whether e-mails are being transferred correctly click on Test connection
.

3.14.5 Data view

To edit program settings for data display (Viewer), in the Tools menu click
Options, then in the Options window click Data view > Configuration >
Configure. This opens the Configuration window of the Viewer.
For further details, refer to Viewer section "Program settings
3.14.6 Automatic export
The Trendline software can automatically export data from CM measurements
as soon as the Detector receives them. It can automatically send the exported
data by e-mail or save them to a compressed ZIP file.
· Click on Options in the Tools menu then click on Automatic export in the
Options window.
E-mail export
· Click on Automatic to switch on the automatic export and subsequent dispatch
by e-mail.
· Click on Only on alarms to carry out the automatic e-mail export only if the data
received from the Detector contains alarms.
File export
· Click on Automatic to instruct the software to export data automatically to a file.
· Click on Only on alarms to carry out the automatic file export only if the data
received from the Detector contains alarms.
· In Default file name (.tr3) enter a name for the ZIP file to be saved. The file
name must include the ".zip" extension.
· Select the storage location for the exported file at Default directory.
Trendline 3
".
160
182
113