Add Bearing - FAG Detector III Manual

3.5.2 Add bearing

To add a bearing to the bearing database click on Add bearing.
· Select a manufacturer from the list.
· Enter a name for the bearing in the Label field.
· Detailed comments may be entered in the Comment field (optional).
Geometry data or damage frequencies
· Use the Geometry and Frequencies options to switch between the input fields
in the right-hand area of the window in order to enter corresponding data. When
inputting the contact angle select either degrees or radians as the unit. When
specifying the frequencies enter whether these should be in Hz or rpm.
Trendline 3
71