Importing And Exporting Data - FAG Detector III Manual

· Enter the start and end time. Alternatively, you can enter the end time and
specify the duration in whole days in the No. of days input field. In the latter
case the start time is automatically determined.

3.13 Importing and exporting data

3.13.1 Importing data from a Trendline 3.x database
You can import configurations and measuring data from a Trendline 3.x database
using the following procedure: Use the following sequence:
· Click on File > Import > Trendline 3.x data.
· Select the file to be imported (*.tr3) and click OK.
3.13.2 Export wizard
Flexible selection of export data is possible using the export wizard. You can
include pictures and comments, specify a period for the data to be exported or
export only selected data objects, for example.
To export data proceed as follows:
· Click on Export > Export wizard in the File menu. This launches the export
wizard which guides you step-by-step through the export function.
· First select an export file. To do so, click
· Next decide whether pictures and comments should also be exported. Note
that pictures in particular can increase file size dramatically. Make sure that
there is enough memory available.
· Now decide whether Trendline should export All Data or just a Selection. If you
select All data the exported file may be very large.
· Finally, you can limit the data to be exported by selecting Not yet exported data
only and/or Only meas. positions with alarm conditons.
· Click on Finish to apply your settings and create the export file.
and enter a file name.
Trendline 3
105