Setting Up Run Up/Coast Down - FAG Detector III Manual

3.4.8 Setting up run up/coast down

Configuration
RFID status
In this section you can display and edit the status of an RFID tag assigned to the
measuring point:
· No RFID No RFID tag is assigned to the measuring point.
· Assign RFID This option instructs the Detector to assign an RFID tag placed on
the machine to this measuring point during the next round.
· RFID assigned An RFID tag is assigned to the measuring point. The unique ID
is displayed in the RFID number field.
· Delete RFID This option instructs the Detector to cancel the RFID tag
Trendline 3
61