Route Report - FAG Detector III Manual

start or end of the report using the arrow buttons.
· Click on to print out the report.

3.12.3 Route report

You can use the route report to create an overview of settings and measuring
points for a specific route.
· Click on Route report in the Service menu and select a route that has been
defined in your configuration.
· Click on OK. The Route report window opens.
You can use the toolbar to control the screen display:
· The display size can be defined in View. Select Percent adjustable to enter a
zoom factor expressed as a percentage in the Percent input field.
· You can navigate forwards or backwards through the report and also jump to the
start or end of the report using the arrow buttons.
· Click on to print out the report.
3.12.4 Balancing report
To create a balancing report click on an element of your system structure then
click on Balancing report in the Service menu. The Configure report properties
window opens.
102