Deleting The Trendline Database - FAG Detector III Manual

If the "Always save" option is selected for more time signals in the
configuration that you wish to send to the Detector than are
permitted in the Detector memory an error message will be output
and the data will not be transferred. Also refer to Frequency
analysis

3.4.11 Deleting the Trendline database

To delete a Trendline database and remove all configuration and measured data
irreversibly, the database must be open.
· To delete the currently open Trendline database, click Delete current database
in the Tools menu. The program displays a security prompt.
· Click Delete to delete the database irreversibly.
You cannot interrupt the delete process!
3.5 Bearing database
The Trendline database provides you with data on the most widely used bearings
for use in your individual configuration (see Setting up measuring point
You can also add your own bearings
bearing database also includes a group administration feature
use, for example, to group bearings of different makes that have similar
characteristics.
Click Tools > Bearing database to open the bearing database.
68
.
217
71
to the above. Furthermore, the Trendline
).
45
which you can
75