Characteristic Values - FAG Detector III Manual

RFID KIT
· Base unit with accumulator and RFID reader
· 5 RFID tags
· Accelerometer with magnetic foot
· Infrared temperature sensor
· Battery charger with travel adapter
· PC data cable (serial/USB)
· Manual
· Protective bag with temperature sensor holder
· Trendline PC software
· Case
Accessories
Sensor extension cable (5m and 15m length), sensor bases and rail magnet
available on request.

2.5 Characteristic values

Detector III can store up to 4 different (or same just as well) characteristic values
per measuring point. The following characteristic values can be selected:
Charac- Meaning
teristic
value
RMS value of vibration velocity
ISO 10816
Frequency range: 10 Hz to 1 kHz
Unit: mm/s
RMS value of vibration velocity with freely selectable upper and lower limiting frequency
v
sel
Frequency range: 0.3 Hz to 20 kHz (depending on the lowpass frequency)
Unit: mm/s
RMS value of acceleration in vibration
a
eff
Frequency range: 2 Hz to 20 kHz (depending on the lowpass frequency)
Unit: g
RMS value of acceleration in vibration with freely selectable upper and lower limiting frequency
a
sel
Frequency range: 0.1 Hz to 20 kHz (depending on the lowpass frequency)
Unit: g
Demodulation signal of acceleration in vibration with switchable low-pass
d
eff
Frequency range: 0.1 Hz to 20 kHz (depending on the lowpass frequency)
Unit: g
d
RMS value of demodulation in vibration with freely selectable upper and lower limiting frequency
sel
Frequency range: 0.1 Hz to 20 kHz (depending on the lowpass frequency)
General
15