Send Route - FAG Detector III Manual

· Click on to add a new template group.
· Under Name you can name the group, under Picture you can include a picture
with .
- With you create a new template. Here just as well, you can change the
name (under Info) and insert a picture. Once you have created five templates
into a group, you cannot add any more into this group. On the page
Configuration you can set the sensor type and the time signals desired.
- With you add new characteristic values to the template. More information
to that you will find in "Set up characteristic values
· In order to add a new balancing configuration to the template group click on
For more information refer to Add balancing configuration
· In order to add a new run up / coast down configuration to the template group
click on For further details see "Setting up run up/coast down
· With you can delete the element selected from the list.
· With and with
selected or close again respectively.

3.6.3 Send route

There are two ways to send a route to the detector:
· Click on Detector > Send Route (or on
84
you can unfold the tree starting from the element
) in the configuration window.
".
50
..
53
".
61