Viewing Measuring Data - FAG Detector III Manual

also "Enter system structure

3.8 Viewing measuring data

3.8.1 Measured values
In the register Measured values the selected measured values are displayed in a
table. When a row is printed in bold, then at least one time signal for this
measurement is stored. The time, the measured values determined and any pre-
alarms or alarms that may have been output are displayed for each measurement
in the measured values view.
Limit time range
· In order to limit the time range of the measured values displayed, select the
Time range option.
· Set the desired start and end date.
Changing acquired speed and comment
You can also correct rotational speeds in the Measured value view and edit the
measured values comment: Proceed as follows:
· Click on an entry in the list of measured values.
· Click Change speed and comment.
88
".
42