Trendline 3 - FAG Detector III Manual

3 Trendline 3

The Trendline software is the server-based program for the Detector III. The
Detector itself is designed only for the recording of measured values. All data
organization and evaluation tasks are carried out by the Trendline software.
The monitoring of a system is configured using the software which also evaluates,
analyses, and stores the measuring data delivered by the Detector.
Further, Trendline 3 manages the exchange of data between the server on which
the software is running and the Detector.
3.1 Program installation
In addition to the application program, the Trendline software requires the MSDE
database server. It must be installed either on the local computer or on a network
server. If you are already using an MSDE database server, you can register the
databases with this.
Please note that you need Administrator permissions for your
computer to install the Trendline software completely. If you do not
have these permissions, ask your system administrator. For
example,
permissions and then switch back to a normal user.
3.1.1 System requirements
In order to use the Trendline software in an optimum way, the following minimum
requirements must be met:
General system requirements
· Pentium III PC with 500 MHZ (recommended: 1 GHz)
· at least 512 MB RAM (recommended: 1 GB)
· Screen resolution: 1024x768 (pixels)
Operating systems
· with MSDE 2000: Windows 2000, Windows Server 2003, Windows XP
Please note that the Trendline software does not yet run on
Windows Vista.
Hard disk memory for installing the Trendline software
· Trendline software 3.2 (without database and database server): 62 MB
18
you can install the software with Administrator