Setting Characteristic Values - FAG Detector III Manual

· Selecting measurements:
o To keep the bearing information for the existing measurements of this
measuring point, click Do not disable the bearing for any measurement of
this measuring point.
o To delete the bearing information from all saved measurements of this
measuring point, click Disable the bearing for all existing measurements
of this measuring point.
o To delete the bearing information from measurements in a certain time range,
click Deactivate bearing for all measurements of following timerange and
select the time range.
Displaying bearing information
· Click on the desired bearing and then
in the bearing database.
Measured values
In the Measured data section you can display the acquired data numerically and
graphically. For more information refer to Measured values

3.4.4 Setting characteristic values

You can create the following characteristic values per measuring point:
· ISO 10816
· A and A ,
sel eff
50
. This displays the bearing information
.
88