Reference Information; Mounting The Transmitter Or Receiver; Tabletop Use; Mounting Kits - Extron electronics DTP2 T 211 User Manual

Reference
Information
This section provides procedures for mounting the DTP2 211 transmitter and receiver and
disconnecting the ground between them.
•
•

Mounting the Transmitter or Receiver

ATTENTION:
ATTENTION : Risque de dommages matériels :
The 1-inch high, quarter rack width, 6-inches deep transmitter and receiver can be placed
on a table, mounted in a rack, or mounted under a desk or table. The receiver can also be
mounted on a projector bracket.

Tabletop Use

Affix the included rubber feet to the bottom of the unit and place it in any convenient
location.

Mounting kits

Mount the unit using the optional compatible mounting kit listed on the Extron website, in
accordance with the directions included with the kit. The devices are compatible with the
Extron Half Rack shelf system HRB 109, Extron UTS under the table shelf system, Extron
rack shelves RSU 126, and MBU 125 under the table shelf brackets.
For rack mounting, see
Mounting the Transmitter or Receiver
Internal Settings
Risk of property damage:
• Installation and service must be performed by authorized personnel only.
• L'installation et la maintenance du système doivent être exclusivement effectuées
par le personnel autorisé.
Avoid ground potential differences between the transmitter and receiver installation
•
sites, which can lead to equipment damage or a missing or unstable picture. If a
potential difference cannot be avoided, remove the ground connection between the
units and locally power both units (see
• Évitez les différences de potentiel de mise à la terre entre les sites d'installation
d'émetteur et de récepteur de commutation, qui pourraient endommager
l'équipement ou rendre l'image invisible ou irrégulière. Si une différence de potentiel
ne peut être évitée, enlevez la connexion de mise à la terre entre les unités et
alimentez les deux unités localement (voir
UL Rack-Mounting Guidelines
Internal Settings on page 32).
Internal Settings à la page 32).
on the next page.
DTP2 T/R 211 • Reference Information 31