Installation; Tools; Safety Gear - Pylontech PowerCube-H1 Operation Manual

3. Installation

Please check every installation step in detail at <Annex 2: Installation and System Turn ON
Progress List> during the install.

3.1 Tools

The following tools are required to install the battery pack:
Wire Cutter Crimping Modular Plier Cable Ties
Screw Driver Set Electric Screw Driver Sleeve Piece
Adjustable Wrench
NOTE
Use properly insulated tools to prevent accidental electric shock or short circuits.
If insulated tools are not available, cover the entire exposed metal surfaces with available
insulated alternatives, except their tips, with electrical tape.

3.2 Safety Gear

It is recommended to wear the following safety gear when dealing with the battery pack
Insulated gloves Safety goggles Safety shoes
18PIHV0802
6 / 27