Installation; Tools; Safety Gear; Package Items - Pylontech PowerCube-H1 Product Manual

3. Installation

3.1 Tools

The following tools are required to install the battery pack
Wire Cutter Crimping Modular Plier Screw Driver Set
NOTE
Use properly insulated tools to prevent accidental electric shock or short circuits.
If insulated tools are not available, cover the entire exposed metal surfaces of the available tools,
except their tips, with electrical tape.

3.2 Safety Gear

It is recommended to wear the following safety gear when dealing with the battery pack
Insulated gloves Safety goggles Safety shoes

3.3 Package Items

Accessories

The type and quantity of the accessories are subject to the battery packing list.
NOTE
Power cable uses water-proofed AMPHENOL connectors. It must keep
pressing this Lock Button during pulling out the power plug.
15 / 23
17PIHV1101