Digital Inputs - gefran GFW ADV Configuration Manual

DIGITAL INPUTS

There are always three inputs. Each input can perform various functions based on the setting of the following parameters:
140
diG.
618
diG. 2
694
diG. 3
Read state
68
STATE of DIGITAL
INPUT 1
bit
92
STATE of DIGITAL
INPUT 2
bit
67
STATE of DIGITAL
INPUT 3
bit
317
518
In.PWM
Functions related to digital inputs
- MAN / AUTO controller
- LOC / REM
- HOLD
- Reset memory latch
- Select SP1 / SP2
- Software OFF / ON
- START / STOP Selftuning
- START / STOP Autotuning
- Calibration of feedback reference
- Calibration of HB alarm setpoint
26
R/W Digital input function
R/W Digital input 2 function
R/W Digital input 3 function
OFF = Digital input 1 off
R
ON = Digital input 1 on
OFF = Digital input 2 off
R
ON = Digital input 2 on
OFF = Digital input 3 off
R
ON = Digital input 3 on
R State of (INPUT_DIG) digital inputs
R PWM input value
see AUTO/MAN CONTROL
see SETTING THE SETPOINT
see HOLD FUNCTION
see GENERIC ALARMS AL1 .. AL4
see SETTINGS - Multiset
see SOFTWARE SHUTDOWN
see SELFTUNING
see AUTOTUNING
see FEEDBACK
see HB ALARM
Digital input functions table
0 No functions (input off)
1 MAN/AUTO controller
2 LOC / REM
3 HOLD
4 AL1, ..., AL4 alarms memory reset
5 SP1 / SP2 selection
6 Software on/off
7 None
8 START / STOP Selftuning
9 START / STOP Autotuning
10 Power_Fault alarms memory reset
11 LBA alarm reset
12 AL1 .. AL4 and Power_Fault alarms reset
memory
13 Enable at software ON (*)
14 Reference calibration of retroaction
selected by Hd.6
15 Calibration threshold alarm HB
+ 16 for inverse logic input
+ 32 to force logic state 0 (OFF)
+ 48 to force logic state 1 (ON)
(*) For diG. only
(**) IN diG. alternative to serial
Digital input 3 functions table
0 No functions (input off)
1 PWM input
+ 16 for inverse logic input
0
0
0
bit.0 = state INDIG1
bit.1 = state INDIG2
bit.2 = state INDIG3
0,0...100,0%
80963B_MSW_GFW_11-2012_ENG
Activation
On leading edge
On leading edge
On state
On state
On leading edge
On leading edge
On leading edge (**)
On leading edge (**)
On state
On state
On state