Linx 4900 Operating Manual page 8

Eye Contact
Contact lenses should be removed. Flush eyes copiously with clean
running water and continue to do so for at least 10 minutes, holding the
eyelids apart.
Obtain medical attention immediately.
Skin Contact
Remove any contaminated clothing. Wash the affected area thoroughly
with soap and water, or use a proprietary skin cleaner. Do NOT use
solvents or thinners to remove ink from skin.
Inhalation
Remove the affected person to fresh air immediately. Keep the affected
person warm and at rest. If breathing is irregular obtain immediate medical
attention.
Ingestion
If accidentally swallowed, obtain immediate medical attention. Wash out
mouth with water and give 200 to 300 ml (half a pint) of water to drink.
Keep at rest. Do NOT induce vomiting; obtain immediate medical
attention.
In Case of Emergency
In an emergency situation you may need to stop the printer quickly. To do
this:
•
•
•
If possible, the printer should not be left in this state for a long period of
time and should be restarted at the earliest possible opportunity to prevent
ink blockages. If there is a hazard that prevents safe access to the printer's
power supply, do not attempt to shutdown the printer, just vacate the area.
WARNING: IN ALL EMERGENCY CASES, REMOVE THE
CASUALTY FROM THE HAZARD AND CHECK THE
MATERIAL SAFETY DATA SHEETS FOR IMMEDIATE
ACTION. EVACUATE THE CASUALTY TO MEDICAL AID
IF REQUIRED.
MP65492–1
Switch the printer's wall mounted electrical isolator to the off position
to shut off the electricity supply to the printer
Alternatively, switch the printer mains power supply switch at the rear
of the printer to the '0' (off) position
Call for medical assistance as required
(vii) Linx 4900 Operating Manual
Safety