Linx 4900 Operating Manual page 126

4.
5.
MP65492–1
•
Set the Printer Idle option to On or Off:
When set to On, the Printer Idle function is enabled. This means
that the printer goes into power down mode and switches off
(regardless of the Auto Power Down setting) after jet shutdown
is complete, followed by the time stated in the Idle Time (mins)
setting, plus the power down delay time of 10 seconds.
When set to Off, the Printer Idle facility is disabled.
The default Printer Idle setting is Off.
•
At the Idle Time (mins) option, specify the time for the printer to
wait (in an "Idle" state, and with no keyboard activity or other
intervention) until it automatically powers down. You can set the
time between 1 and 300 minutes. The default time is 60 minutes.
Note that the Idle Time (mins) setting is only used in conjunction
with the Printer Idle setting, not the Auto Power Down setting.
Press the [enter] key to save each setting.
Press the [esc] key to exit.
107
Chapter 5: Changing the System Setup
Linx 4900 Operating Manual