Table of Contents
Advertisement
Appendix A: Installation and Setup
Step 4: Calculate and Enter the Print Width Value
1. Calculate Print Width Value
Calculate the print width value for the particular combination of encoder
and encoder wheel used in the application:
Referring back to the example, the calculated pitch factor is 9 (Step 2).
This value indicates that the printer will print one raster for every 9
encoder pulses.
2. Enter Value
Enter the calculated print width value at the Print Width setting (in the
SETUP menu) for the particular combination of encoder and encoder
wheel used in the application:
Figure A-15 Print Width Setting Showing the Calculated Value
Linx 4900 Operating Manual
Print Width
Print Width
Password
Print Height
>
Print Width
Print Delay
Enter the calculated pulses per mm value at this setting.
170
=
Pitch Factor –1
=
9 –1
=
8
SETUP
: Off
: Normal
: 8
: 16
49063
MP65492–1
Advertisement
Table of Contents
