Linx 4900 Operating Manual page 124

3.
4.
5.
MP65492–1
At the ALARM menu:
•
The Mode option allows the alarm output to be changed to
activate the external alarm, as follows:
Select this setting...
Continuous
Pulsed
Note that once system events are cleared, the alarm output is
automatically deactivated.
•
The following options can be set to Yes (On) or No (Off), as
follows:
Set this option to Yes...
Failure
Warning
Print Disabled
Ink and Solvent
Press the [enter] key to save each setting.
Press the [esc] key to exit.
105
Chapter 5: Changing the System Setup
To...
Sound the external alarm continuously
when a System Warning event occurs.
Pulse the external alarm on/off twice, in
time with the internal alarm when a
System Warning event occurs.
Sound the external alarm continuously
when a System Failure or Print Failure
event occurs.
To...
Sound the external alarm
continuously when a Print Failure
event occurs.
Pulse the external alarm on/off
twice, or, sound alarm continuously
when a system failure event
occurs—depending on the Mode
option setting above.
Sound the external alarm
continuously when the printer
cannot print for any reason, e.g jet
stopped, printhead cover removed.
As soon as printing is resumed, or
when the printer is printing, the
alarm is switched off.
Sound the external alarm
continuously, or, pulse the external
alarm on/off twice when a "3.03 Ink
Low" or "3.04 Solvent Low" event
message occurs—depending on the
Mode option setting above.
Linx 4900 Operating Manual