Table of Contents
Advertisement
Chapter 3: Day-to-Day Operations
To Switch the Password System On
When the password system is switched On, a password must be entered to
access certain printer functions. Note that the following instruction
assumes that the password system is Off.
To switch the password system On:
1.
2.
3.
4.
5.
Linx 4900 Operating Manual
At the CURRENT MESSAGE screen, press the [F4] function key.
The SETUP menu is displayed.
Scroll to the top of the SETUP menu until the cursor rests at the
Password option (see Figure 3-17 on page 43).
Press the [enter] key.
At the Password setting, press the Left [ ] or Right [ ] cursor key
to toggle the setting to On, then press the [enter] key.
Press the [esc] key to exit.
44
MP65492–1
Advertisement
Table of Contents
