Linx 4900 Operating Manual page 41

Chapter 2: Getting Started
About
Auto Power Down is a configurable function of the printer. As a default, the Auto Power
Down setting is configured ON for the printer, and power down is automatically initiated after
the jet is shut down.
W hen the printer goes into power down mode, a countdown dialog is displayed and you can
press any key to stop the power down sequence and resume if you wish.
Note that Auto Power Down can also be configured using the Printer Idle setting. Using this
method, a customized delay time can be enforced.
NOTES:
Initiating Power Down and Switching Off Manually
If the 'Auto Power Down' function is not enabled or you wish to manually
switch off the printer:
1.
2.
3.
4.
Linx 4900 Operating Manual
1. Initiation of automatic power down is determined by the options
selected in the Auto Power Down screen. See Chapter 5,
'Changing the System Setup' for details.
2. If you are unsure whether or not to switch the printer off, you
should consult your supervisor.
Shut down the jet. To do this, press the [stop] key.
Check that the printer status on the PRINT STATUS screen is 'Jet
Off'.
Press the [stop] key:
The following screen is displayed:
F1 : Yes
Figure 2-17 Power Down Screen
Press the [F1] function key to select Yes (alternatively, press the [F2]
function key to select No and return to the CURRENT MESSAGE
screen).
Auto Power Down
POWER DOWN
Switch off power?
22
49024
F2 : No
MP65492–1