Linx 4900 Operating Manual page 225

Appendix D: System Event Messages
3.11 Scheduled Maintenance Req'd
Description:
Cause(s):
Solution:
3.12 Printhead Cover Off
Description:
Cause(s):
Solution:
3.18 Low Pressure
Description:
Cause(s):
Solution:
3.19 Valid UNIC Chip Not Found
Description:
Cause(s):
Solution:
Linx 4900 Operating Manual
Printer requires scheduled maintenance.
The remaining time interval until the next scheduled
maintenance (shown in the SYSTEM TIMES menu),
is zero or negative.
Contact your local Linx distributor to arrange a
scheduled maintenance visit.
Printhead cover tube is off.
The printhead cover tube has been removed or is
incorrectly fitted.
Refit the printhead cover tube.
If the failure persists, contact your local Linx
distributor.
The printer cannot achieve the correct pressure.
Blockage in the ink system.
Contact your local Linx distributor.
The UNIC (Unique Number Identification Chip)
located on the IPM board is either missing,
unrecognised by the software, or faulty.
Incorrect, missing, or faulty UNIC.
Contact your local Linx distributor.
206 MP65492–1