Linx 4900 Operating Manual page 227

Appendix D: System Event Messages
3.31 Message Memory Full
Description:
Cause(s):
Solution:
3.32 Remote Error
Description:
Cause(s):
Solution:
Linx 4900 Operating Manual
The message store has reached its maximum capacity.
The maximum permissible number of messages has
been created.
To create another new message, you must first delete an
existing message from the message store.
There is a problem with the remote communications
interface.
The printer has received the 'Set Remote Error'
command (121) through the remote interface.
Contact your on-site remote communications
administrator.
If failure persists, contact your local Linx distributor.
208 MP65492–1