Linx 4900 Operating Manual page 222

2.11 Pressure Limit Reached
Description:
Cause(s):
Solution:
2.12 Viscosity
Description:
Cause(s):
Solution:
2.13 Hardware Safety Trip
Description:
Cause(s):
Solution:
MP65492–1
Appendix D: System Event Messages
Pressure limit has been reached.
Possible partly blocked nozzle.
Perform the Nozzle Clear function. See Chapter 7,
'Diagnostics and Maintenance'.
If the failure persists, contact your local Linx distributor.
As ink viscosity increases (thickens) due to evaporation
or temperature changes, the printer compensates by
adding solvent to the ink. Solvent is added until the ink
pressure falls below its operating limit. An error is
generated when the maximum permitted number of
solvent additions has been exceeded.
Fault in the ink system.
Incorrect printhead set up (Head Height).
Contact your local Linx distributor.
The hardware safety trip has activated, locking out
certain hardware functions.
EHT trip, power supply failure, or printhead over
temperature.
Contact your local Linx distributor.
203 Linx 4900 Operating Manual