Vega VEGAPULS 62 Operating Instructions Manual page 41

6 Set up with the indicating and adjustment module
40
Setup: Resetting of the parameter settings to the default values of the
respective instrument in the menu item Setup. Order-related settings
remain but are not taken over into the current parameters. User-
generated false signal suppression, user-programmed linearization
curve, measured value memory as well as event memory remain
untouched. The linearization is set to linear.
False signal suppression: Deleting a previously created false signal
suppression. The false signal suppression created in the factory
remains active.
Peak values distance: Resetting the measured min. and max.
distances to the actual measured value.
The following table shows the default values of the instrument.
Depending on the instrument version, not all menu items are available
or differently assigned:
Menu Menu item
Setup Measurement
loop name
Medium
Application
Vessel form
Vesell height/
Measuring range
Min. adjustment
Max. adjustment
Damping
Current output
mode
Current output
Min./Max.
Lock operation
Display Language
Displayed value
Display unit
Scaling size
Default value
Sensor
Liquid/Water
Bulk solids/Crushed stones, gravel
Storage tank
Silo
Vessel bottom, dished boiler end
Vessel top, dished boiler end
Recommended measuring range, see
Technical data
"
Recommended measuring range, see
Technical data
"
0,000 m(d)
0.0 s
4 ... 20 mA, < 3.6 mA
Min. current 3.8 mA, max. current
20.5 mA
Released
According to order
Distance
m
Volume
l
VEGAPULS 62 • 4 ... 20 mA/HART two-wire
" in the supplement
" in the supplement