Vega VEGAPULS 62 Operating Instructions Manual page 17

4...20 ma/hart two-wire

Hide thumbs Also See for VEGAPULS 62:

Table of Contents

4 Mounting

Orientation of the sensor

Fig. 8: Recommended socket mounting

If the reﬂective properties of the medium are good, you can mount

radar sensor on sockets which are higher than the length of the

antenna. You will ﬁnd recommended values for socket heights in the

following illustration. The socket end should be smooth and burr-free, if

possible also rounded. After installation you must carry out a false

echo storage.

Fig. 9: Deviating socket dimensions

Tip:

The instrument is optionally also available with antenna extension.

Hence the antenna length can be selected such that the antenna end

protrudes 10 mm (0.4 in) out of the socket.

In liquids, align the sensor as vertical as possible to the product

surface to achieve optimum measuring results.

1½"

50 mm/2"

80 mm/3"

100 mm/4"

150 mm/6"

VEGAPULS 62 • 4 ... 20 mA/HART two-wire

max.

200 mm

250 mm

300 mm

500 mm

800 mm

Table of Contents