Vega VEGAPULS 62 Operating Instructions Manual page 16

4...20 ma/hart two-wire

Hide thumbs Also See for VEGAPULS 62:

Table of Contents

Inﬂowing medium

Socket

VEGAPULS 62 • 4 ... 20 mA/HART two-wire

Fig. 6: Mounting of the radar sensor on vessels with conical bottom

Do not mount the instruments in or above the ﬁlling stream. Make sure

that you detect the product surface, not the inﬂowing product.

Fig. 7: Mounting of the radar sensor with inﬂowing medium

The socket piece should be dimensioned in such a way that the

antenna end protrudes at least 10 mm (0.4 in) out of the socket.

4 Mounting

Table of Contents