Load Cell Replacement And Flexure Troubleshooting; Required Tools For Replacing A Load Cell - Rice Lake CLS-M Installation & Service Manual

Cargo lift scale

Hide thumbs Also See for CLS-M:

Table of Contents

6.0

Load Cell Replacement and Flexure Troubleshooting

This section describes procedures for replacing a load cell. The CLS uses Rice Lake's load cell, PN 125543.

The following instructions must be followed exactly to allow for seamless and easy load cell replacement.

Take all necessary safety precautions when installing or replacing the scale parts including wearing safety

WARNING

shoes, protective eyewear, and using the proper tools.

6.1

The following list of tools is necessary for replacing a load cell on the CLS-M scale. Ensure that you have these tools handy.

Adequate light is necessary to change the load cell. Try to position the forklift close to a good source of natural light

Note

or if not possible, have a good source of lighting available.

Rice Lake

Part #

Item Description

96196

Modified box wrench

Crescent wrench

3/4" socket wrench, with extensions

ball-peen hammer

1-1/8" wrench for overload stop

Chisel

Allen wrench for overload stops

Torque wrench

Pry bar

Table 6-1. Required Tools for Replacing a Load Cell

Load Cell Replacement and Flexure Troubleshooting

Table of Contents