Unpacking A Two Scale Configuration - Rice Lake CLS-M Installation & Service Manual

CLS-M Installation/Service Manual
2.3.2

Unpacking a Two Scale Configuration

The scales are shipped in an upright position which allows for ease of installation. The power/communication box and
accessories are located in a hardware component box.
When installing from a two scale configuration, complete all of steps for scale one before clipping plastic bands
WARNING securing second scale to the shipping pallet.
Hardware component
boxes
Protective wood
covering
Wood shipping pallet
Step 1: Clip top plastic bands
Step 2: Clip plastic band to release hardware component boxes
Step 3: Remove hardware component boxes
Step 4: Clip plastic bands from first scale
Step 5: Remove protective wood covering for first scale; scale
one is ready for installation
Step 6: Clip plastic bands from scale two
Step 7: Remove protective wood covering for second scale;
scale two is ready for installation
www.RiceLake.com
8 Visit our website
Exploded View of Components
Plastic
banding
Protective wood
covering
Figure 2-3. Unpacking Two Scales
Scale
Protective wood
covering
Do not clip the plastic band from scale two until
scale one is installed