Power Cable To Battery Connection - Rice Lake CLS-M Installation & Service Manual

Cargo lift scale

Hide thumbs Also See for CLS-M:

Table of Contents

CLS-M Installation/Service Manual

3.3.1

Power Cable to Battery Connection

1. An in-line fuse is included with the scale. The fuse comes enclosed in an in-line fuseholder with a terminal connector.

Connect the fuse assembly to the power cable assembly using the terminal connectors.

2. If required, prepare the battery end of the fuse holder for connection by attaching the terminals to the three wires.

Ensure there is enough wire exposed, slip the terminal over the wire and use a crimping tool to secure terminal to the

wire.

www.RiceLake.com

Visit our website

Do not route close to removable

parts like dipsticks.

Avoid pinch points like latches

and hinged areas.

Do not route power cable

close to fan blades.

Do not route power cable close

to objects that generate heat

such as exhaust pipes.

Figure 3-7. Areas to Avoid When Running Power Cable

Figure 3-8. In-line Fuse (PN 130129)

Attach terminals to

power cable at battery.

Figure 3-9. Attach Terminals to Power Cable - Battery End

Table of Contents