Standard Calibration With Linear Points - Rice Lake CLS-M Installation & Service Manual

CLS-M Installation/Service Manual
5.3.1

Standard Calibration with Linear Points

This calibration method is used in combination with a pallet. Use the following steps to do a standard calibration with linear
points.
1. Enter the six-digit serial number of the scale. The serial number can be found on the top-right cleat of the scale back
plate or the serial tag installed on the scale. If the serial number is incorrect or 0, enter the correct serial number.
Press Next to store that number.
2.
www.RiceLake.com
48 Visit our website
Figure 5-23. Enter Serial Number
Figure 5-24. Select Next to Store Number