4.9
Diagnostics
Diagnostics works in setup or normal operating mode.
Selecting Auto refresh will continuously display data communications for each screen.
Note
1. Press
.
2. Press Diagnostics. The Diagnostics Monitor displays:
4.9.1
Diagnostics Monitor
1. Power Supply – look for a voltage range between 6.2 and 6.5
2. Slave Communications – not applicable to CLS software.
Figure 4-40. Select Diagnostics
Figure 4-41. Power Supply
Figure 4-42. Slave Communications
© Rice Lake Weighing Systems ● All Rights Reserved
Revolution® Interface to CLS
35