CLS-M Installation/Service Manual
2.3
Unpacking
If any parts were damaged in shipment, notify Rice Lake Weighin Systems and the shipper immediately.
The CLS is shipped upright on a sealed pallet with one or two scales per pallet.
Upon receipt of the shipping pallet, inspect it for any visible signs of damage. Immediately after unpacking, visually inspect the
contents to ensure all components are included and undamaged. The shipping pallet should contain the following:
1. One or two scale carriage assemblies with cover plate.
2. Hardware component boxes, which include:
A. Two cleats with four bolts.
B. One interface cable.
C. One power cable and hardware for battery connection.
D. One power/communication box.
E. One mounting kit for power/communication box with hardware.
To ensure that all products received from the manufacturer are in good shape upon arrival, it is recommended to
fully inspect all contents and properly fill out the bill of lading.
Note
www.RiceLake.com
6
Visit our website
Hardware
Component
Boxes
Figure 2-1. CLS-M Packaging