Table of Contents
Advertisement
Section 1
System Configuration
Figure 1-5 illustrates a typical UBA system configuration.
* a standard UBA Faceplate can be instantly connected. If
connecting a custom designed Faceplate, refer to Table 2-5 on
page 2-6 of Section 2 for proper Connector and Pin Assignment
information.
Primary Features
The UBA Series of Bill Validators contains the fol-
lowing primary features:
•
Automatic Centering
–
The automatic centering mechanism allows
the unit to read Banknotes ranging from 62
to 85mm in width without using special
Banknote guides (See Figure 1-6). It helps to
improve the overall acceptance rate.
Figure 1-6 UBA Automatic Centering Feature
•
Proven Anti-pullback (anti-fishing)
Technology
JCM Part No. 960-000097R_Rev. 3
Universal Bill Acceptor (UBA-1x-SS & UBA-x4-SS/SU)
Figure 1-5 UBA System Configuration
1 - 6
†
a PC can be connected to download software and perform
adjustments. For details concerning software downloading
and adjustment procedures, refer to Section 6 of this Manual.
–
This JCM patented Anti-Pullback
Mechanism provides powerful protection
against Banknote stringing.
–
The drum rotates every time a Banknote
passes through the unit, and tangles around
any foreign object attached to the Banknote,
such as string and/or tape (See Figure 1-7).
Figure 1-7 UBA Anti-Pullback Feature
© 2010, JCM American, Corporation
General Information
Advertisement
Table of Contents
