Using Wpp20 Wireless Presentation Pod; Sharing Content Via Wpp20 - Yealink VP59 User Manual

Receive conference schedule from the cloud video
conference platform.

Using WPP20 Wireless Presentation Pod

You can share the content from your computer on the phone. We recommend that you use two screens for
sharing content. Only one content can be shared at a time, and the content shared later will replace the
previous one.
About this task
You can use Yealink WPP20 wireless presentation pod for content sharing. Before sharing the content, you
need insert the WPP20 wireless presentation pod to the phone for pairing. For more information, refer to
Yealink WPP20 Wireless Presentation Pod Quick Start Guide
Note: If you connect a monitor to the phone, the shared content is displayed on the monitor rather
than on the phone screen.

Sharing Content via WPP20

•
Switching the Shared Content via WPP20
•
Stopping Sharing Content via WPP20
•
Starting/Stopping Presentation
•
Related tasks
Enabling HDMI
Sharing Content via WPP20
Before you begin
1. Make sure you pair WPP20 with VP59.
2. Make sure you enable the wireless AP.
Procedure
1. Make sure the computer is powered on and you connect the WPP20 wireless presentation pod to your
computer.
2. Do one of the following:
• On the WPP20, press the presentation button to share the full screen.
• On the WPP20, long press the presentation button for 3 seconds and then release this button. Select
the file or window you want to share and then click Start sharing.
On the Yealink Wireless Presentation Pod software, click Contents Share, select the file you want to
•
share, and then click Start sharing.
The computer content is automatically projected to the device.
| Using WPP20 Wireless Presentation Pod | 33
√
× ×