Handling Multiple Calls; Volume Adjustment And Synchronization; Using Teams /Voice Assistant Button; Invoking The Teams Client - Yealink CP700 User Manual

Procedure
Hold the Answer Call button
The three-way conference for the mixed channel is successfully established.

Handling Multiple Calls

Procedure
You can do the following:
• Tap the Answer Call button
• Tap the Answer Call button
• Tap the End Call button

Volume Adjustment and Synchronization

Procedure
Tap the Volume Up/Volume Down button
Note: The volume will be synchronized between the speakerphone and the connected device. It is
limited by the connected device.

Using Teams /Voice Assistant Button

If connected via USB cable or Bluetooth, you can use this button.
When used with the Teams client, the button LED indicator is as follows. When the voice assistant is
activated, the button always glows white.
LED indicator
LED Indicator
Slow-flashing white
Solid white
Off
•

Invoking the Teams Client

• Activating Voice Assistant
Invoking the Teams Client
Procedure
After the Teams client connects, tap the Teams button
for 3 seconds.
to put the current call on hold and answer the incoming call.
to switch between held call and active call.
to reject the incoming call and keep the current call.
/ .
Description
When there are missed calls/voice mails/Teams meeting
notification
Teams connected
Teams disconnected
.
| Using the Speakerphone | 11