Placing An Internal Call During An External Call; Placing External Calls; Placing A Call From The Call History; Placing A Call From The Directory - Yealink W73P User Manual

Placing an Internal Call during an External Call

During an external call, you can place a call to an internal line. To do this, complete the following
steps:
1. Select Options >
2. Select the Desired Handset

Placing External Calls

To make a telephone call, simply enter the extension number or telephone number of your destination
and press OK or Off-hook
Placing multiple External Calls
When you are in an active call you can put your call on hold and then place a new call.
1. Select New Call
2. Enter the extension number or telephone number and then press the

Placing a Call from the Call History

You can place calls to contacts from the History list, which contains the calls that were recently placed,
answered, or missed.
1. Press History or go to
2. Select the desired call list
3. Highlight a contact and press the

Placing a Call from the Directory

You can place a call to a contact directly from your directory.
1. Press OK > Directory
2. Select the desired directory
3. Highlight a contact and press the

Redial

You can redial a call from the Redial list. The W73H stores the last 20 dialled phone numbers. When
the redial list gets full, the handset will automatically erase the oldest entry when a new number is
dialled.
Page 12 of 18
Intercom
and press OK
key.
OK > History
Off-hook key
Off-hook key
or Send
or Send.
or Send.
OK key.
Yealink W73P | User Guide
© Gamma. All rights reserved. Confidential