Maintenance And Cleaning - Kalor Paola 13-13D User Manual

Maintenance and cleaning

All cleaning of all parts must be carried out with the Insert completely cold and
unplugged to avoid burns and thermal shock. The Insert does not need much
maintenance if used with certi ed quality pellet. The need for maintenance
varies depending on the conditions of use (switching on and off repeatedly) and
depending on the performance required.
of the Insert to check its condition.
Parts
Brazier
Cleaning the ash collection
compartment with suction device
Cleaning ash tray
Cleaning the interior heat exchanger /
smoke fan compartment
Cleaning complete exchanger
Clean "T" to exhaust
Flue
Door gasket ash
Internal parts
Flue pipe
Electromechanical components
◊ by the user / • by the authorised quali ed technical assistance
BY THE USER
Daily control
The Insert requires a simple and thorough
cleaning in order to ensure a more ef cient
performance and smooth operation. While
cleaning the inside of the Insert, to prevent
the escape of ashes, you can start the fan ue
exhaust. Clean the grate from the ash and any
incrustation which could obstruct the passage
of air. In the case of depletion of pellets in the
tank,the burn pot may accumulate unburned
pellet. Always empty the residuals from the grate
before each start. Remember that only a brazier
located and clean properly can ensure ignition
and optimal operation of your Insert. When
positioning the crucible, carefully check that
the edges of the crucible adhere completely to
their place and that the hole coincides with the
tube dedicated to the passage of the resistance.
There must be no combustion residue in the
contact zone between the edges of the crucible
and the support surface on the sink-holder.
Every 2-3
Everyday
days
◊
◊
◊
It is recommended periodic monitoring
Every Every 15 Every 30
week days days
Every 60- Every 1
90 days year
•
•
•
•
•
•
•
•
97