Cleaning The Surfaces - Kalor Paola 13 User Manual

11.0 Cleaning and maintenance
11.1 Ordinary cleaning (to be done every day or when necessary)
Before effecting any maintenance operation or cleaning on the insert, take the following precautions:
• Be sure that all parts of the insert are cold;
• Be sure that the ashes are completely cold;
• Be sure that the general switch is in the "OFF" position;
• Be sure that the plug is pulled out of the socket to avoid accidental contact;
• Once the maintenance phase is completed check that everything is in order as per before the intervention (the brazier is
placed correctly).
Follow carefully the following cleaning instructions. Failure to follow
!
these instructions could create problems with the operation of the
insert.

11.2 Cleaning the surfaces

To clean the surfaces, use a rag dampened with water or with water and a neutral detergent.
The use of aggressive detergents or thinners can damage the surfa-
ces of the insert. Before using any detergent it is advisable to try it
!
on a small section out of sight or contact the Authorized Assistance
Centre for information regarding the product.
11.3 Cleaning the metal parts
To clean the metal parts of the insert, use a soft cloth dampened with water.
Never clean the metal parts with alcohol, thinners, petrol, acetone or other degreasing substances. If such substances are
used, our company declines any responsibility.
Eventual variations in the colour of the metal parts can be caused by an incorrect use of the insert.
11.4 How to open the door of your fire-
place insert
Open the door only when the fireplace insert is switched
off and cold. Use the provided dedicated tool (detail 1,
Pict.12) to open the door: assemble the hook at the one
end of the detail 1 in the hole of the handle and pull the
door.
14
1