Maintenance And Cleaning; By The User - Kalor Ada 28B User Manual

Maintenance and cleaning

All cleaning of all parts must be carried out with the Thermostove completely
cold and unplugged to avoid burns and thermal shock. The Thermostove does
not need much maintenance if used with certifi ed quality pellet. The need for
maintenance varies depending on the conditions of use (switching on and off
repeatedly) and depending on the performance required.
periodic monitoring of the Thermostove to check its condition.
Parts
Brazier
Cleaning the ash collection
compartment with suction device
Cleaning ash tray
Exchanger (turbulators)
Flame beater
Cleaning the interior heat exchanger /
smoke fan compartment
Cleaning complete exchanger
Clean "T" to exhaust
Flue
Door gasket ash
Internal parts
Flue pipe
Circulation pump
Plate heat exchanger
Hydraulic components
Electromechanical components
◊ by the user / • by the authorised qualifi ed technical assistance

BY THE USER

Daily control
The Thermostove requires a simple and thorough cleaning
in order to ensure a more ef cient performance and smooth
operation.
Every 2-3
Everyday
days
◊
◊
◊
◊
◊
While cleaning the inside of the Thermostove, to prevent the
escape of ashes, you can start the fan ue exhaust. To enable
this feature, you must press the button
The display shows "
To stop the fan, simply press and hold the button
completion of a cleaning cycle (255 seconds).
Clean the grate using the appropriate tool from the ash and
any incrustation which could obstruct the passage of air. In
the case of depletion of pellets in the tank may accumulate
unburned pellets in the burn pot.
Always empty the residuals from the grate before each start.
Remember that only a brazier located and clean properly can
ensure ignition and optimal operation of your Thermostove.
When positioning the crucible, carefully check that the ends
of the pads completely adhere to their home and that the
hole with pipe dedicated to the passage of the resistance.
There should be no residual combustion in the contact zone
between the edges of the crucible and the support surface
on the door crucible.
Every Every 15 Every 30
week days days
PU L S T U F
It is recommended
Every 60- Every 1
90 days year
•
•
•
•
•
•
•
•
•
•
•
and then .
" (cleaning Thermostove).
or wait for
89