Kalor Paola 13-13D User Manual page 17

Insert ignition
Remove any components which might burn from the rebox and from the glass
(various instructions and adhesive labels)
Charge pellet
Fuel is loaded from the upper part of the Insert by opening a door. Pour the pellets in the hopper.
When empty, this is easier if performed in two steps:
• Pour half of the contents of the bag into the hopper and wait for the fuel to settle on the bottom.
• Then pour in the rest.
Never remove the protection grille in the hopper. When lling, do not let the sack
of pellets touch any hot surfaces.
The brazier should be cleaned before each starting.
Control Panel
Button is used to switch on and / or off the Insert and to exit programming.
Buttons and
Buttons and
Button e is used to adjust temperature and programming functions.
The upper and lower displays are used to view different messages.
SYMBOL
The LED is on when the parameter UT01 on the menu is not on OFF and the weekly
or daily programming are set.
The LED starts up every time the Insert is loading pellets
The LED blinks to indicate that you are entering the menu user/technician or that you
SET
are modifying the temperature set.
are used to adjust temperature, for displays and for the programming functions.
are used to adjust heating power.
DESCRIPTION
Fan
acc
87