Information On The Display - Kalor Paola 13-13D User Manual

Preliminary checks
Before switching on the pellet Insert, make sure that the pellet hopper is full, the combustion
chamber is clean, the glass door is closed, the power supply plug is connected and the switch on
the back is set to "1."

Information on the display

TURNED OFF
21 : 10
22°C P-1
The Insert is off.
TURNED OFF
TURNED ON
14 : 35
21°C P-2
The Insert is in the rst ignition phase.
ACCENDE
The glow plug and fume extractor are active.
LOAD PELLET
14 : 35
21°C P-2
LOAD In this phase of the ignition process the Insert starts loading the pellets into the
pellet
brazier. The glow plug, the fume extractor and the cochlea engine are active.
FIRE PRESENT
14 : 35
22°C P-1
In this phase of the ignition process the Insert starts loading the pellets into the
FIRE
brazier. The fume extractor and the cochlea engine are active.
present
WORK
15 : 18
22°C P-3
The Insert is working, in this case at power 3.
WORK
The detected room temperature is 21 ° C. During normal work, the fumes fan,
the auger motor and the room fan are active.
BRAZIER CLEANING
15 : 18
22°C p-2
The Insert is cleaning the basket.
BRAZIER
The smoke extractor runs at maximum speed and the pellet load is at minimum.
CLEANING
88