Table of Contents
Advertisement
ALARMS
Message
INVERTER FAILURE
BOOSTER FAILURE
BATTERY CHARGER FAILURE
OVERHEATING
OVERLOAD
HVBUS RUNAWAY
EXC. IN OUT DC LEVEL
EXCESS.BATTERY V
MODULE COMMUNICATION
FAILED
LOAD NOT PROTECTED
Tri Power X33 Mod HP Manual | Rev 1.20 | © Alpha Technologies GmbH 2013
Tri Power X33 Mod HP
Failure occurred in the Inverter circuit.
Failure occurred in the Booster circuit.
Failure occurred in the Battery Charger circuit.
Overheating. Check the UPS ventilation system.
Overload. Check the load level connected to the UPS.
Anomalous high voltage on the DC BUS.
Excessive DC voltage in output.
Battery voltage too high.
Failure of the communication system with the Power Modules.
Load not protected by the UPS.
Meaning
71
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Tri Power X33 Mod HP series and is the answer not in the manual?